Industrial Drying Blower

Industrial drying is not just an airflow problem, it is a thermal transfer process also. Whether the products will dry consistently within specification depends on the fan that circulates the air through the drying chamber, tunnel oven or rotary dryer. If there is low air velocity, then moisture removal stalls and slows down the productivity. In another case, high air velocity surface over-drying masks residual moisture inside. Besides that, this fan needs to operate continuously under a critical environment like hot and moisture-laden air, small fine particle-mixed air or volatile compounds. Which is not sustainable and suitable for a ventilation fan.

The Industrial Drying Blower is specially engineered for sustained hot and humid air circulation duty. In bearing arrangements, the motor and bearing maintain distance and protect against hot process air. A shaft seal that is suitable for high temperature and humidity can prevent hot air from entering the bearing housing. Engineers can choose the impeller based on their duty. Such as a backward-inclined impeller that can be used for clean, low-dust drying air and higher efficiency, a radial-blade impeller suitable for sticky, fibrous or chemically contaminated drying media where fouling resistance matters more than peak efficiency.

Industrial Drying Blower provide up to 90,000 m³/h airflow and up to 7,600 Pa static pressure. It can cover all the drying industrial systems, from batch ovens to massive rotary drum dryers. This unit comes with strong motor power and tolerates up to 600 degrees Celsius. Which is quite perfect for different temperature operations like food-grade drying at 60°C to 120°C, ceramic and brick drying at 80°C to 250°C, medicine and chemical drying at 80°C to 300°C and fireproof materials and refractory at 250°C to 600°C. This unit is the perfect solution for production engineers, drying system designers and EPC contractors who need to operate in the ceramic, textile, pharmaceutical, wood and chemical industries.